Loading the film – Canon EOS 600 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LOADING THE FILM
1) Push the back cover latch
down while pressing the back
cover lock button.
Insert the upper-flat end of the
film cartridge into the film
chamber first. The film-load
check mark «a) appears in
the display panel.
Pull the film leader across the
shutter curtain until its tip is
aligned with the orange mark.
Close camera back and film is
automatically to frame. (Blink
ing bars on the LCD panel in
dicate “re-loading”.)
Plastic insert
№
CAUTION
• Before loading the first roll of film, remove the plastic insert.
• NEVER touch the shutter curtain. Its high-precision design
makes it sensitive to pressure. Also, when loading the film, be
curtain
careful that the film leader does not touch the shutter curtain.
1 2