Canon 300 TL - Manual (Page 30)

6 )
Set the control mode set button to the FEL mode and
make sure the control mode confirmation iamp iights
up.
Puil the fiash head out to set at the proper zoom posi­
tion according to the iens.
Make sure the pilot lamp lights up. The mark in
the viewfinder will come on at the same time as the
pilot lamp. Compose the picture and focus the sub­
ject.
Even when an exposure is made without pressing the
control mode set button with the mode selector at
the Mode Set position, the shutter speed and aper­
ture are set automatically The flash output is deter­
mined by measuring the light reflected from the film
surface.
1 6