Canon 300 TL User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
0) Center the main subject in the spot metering mark
and press the spot metering button.
• The aperture is set automatically.
•
Next, a pre-flash is emitted from the main flash
head and the correct flash output value is stored
into memory for 30 seconds.
9) Make sure the fixed dot (l) is aligned with the
triangle index on the right of the viewfinder.
• When the fixed dot is aligned with the triangle in
dex, the exposure is correct for the main sub
ject.
If not aligned with the triangle index, the subject
is out of shooting distance range. Move closer to
the subject and press the spot metering button
again.
Advertising