O- o – Canon Model 7S User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
To
detach
a
bayonet-mount-type
lens
(50mm
F
0.95)
from
the
camera,
turn
the
bayonet
tightening
ring
counter-ciockwise
(iiiustrated
by
smail arrow)... then the iens can be pulled out.
To fit the lens into position, match the red mark
of the tightening ring to the pin on the lens
barrel. Insert the pin of the iens into the hoie
on the iens mounting fiange. . . and turn the
tightening
ring
clockwise
(iiiustrated
by
large
arrow) while pushing in the lens.
•
Traces
of
water
bubbles
cannot
be
entirely
removed from glass used for high quality lenses
because
of
the
manufacturing
process.
Lens
bubbles will not affect the sharpness of the
picture.
Ostachr
® Turn
Bayonet Tightening Ring
O-
O
Insert the pin fnto the hole on [11 Coincide the red dot and guide pin
the lens mounttnii flange
32