Fp flash – Canon 220EX User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
FP Flash
Set the camera to the
desired shooting mode.
Turn on the power of the
Speedlite 220EX.
Press the FP flash button
so that the FP flash indica
tor lights.
Make sure that the pilot lamp is
lit.
Press the shutter button
halfway to focus on the
subject.
5 c—T“’’
Check that “tn is displayed
in the viewfinder. Then,
press the shutter button
completely to take the pic
ture.
• When high-speed sync is set,
4
h
is displayed in the viewtinder,
•
4
is displayed in the viewfinder
under normal flash operations
21
Advertising