Fully-automatic flash operation – Canon 220EX User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Make sure that the pilot
lamp is lit.
Aim the active focusing
point on the subject and
press the shutter button
halfway.
• Focus is achieved and the shut
ter speed and aperture settings
are displayed in the viewfinder
and on the LCD panel.
• The sync speed is set automati
cally anywhere from 1/60 sec up
to the camera maximum sync
speed and the aperture is set
automatically at the same time.
The
camera
maximum
sync
speed will vary depending on the
camera model. (See page 40.)
Fully-Automatic Flash Operation
B O
4.0
1 •
Check that the ^ , shutter
speed, and aperture set
tings are displayed in the
viewfinder. Then, press the
shutter button completely
to take the picture.
27