Ready lamp and test firing, Ready lamp and test firing ......... p. 8 – Canon 420 EZ User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3. Ready Lamp and Test Firing
Turn the main switch ON (“I” mark) and
wait for the ready lamp to light up. To test
functioning, press the ready lamp after it
has lit and if the flash fires it is in proper
working order.
• Be sure to press the ready lamp before press
ing the shutter button halfway. Otherwise, test
firing is not possible.
• Flash charge is also confirmed by the “
i ”
mark in the viewfinder.
• When the shutter button is pressed halfway,
the flash head position automatically adjusts,
(see p.10)
•
For interval flash photography, attach the
Technical Back E and set the mode to the in
terval timer or self-timer. The flash charge
starts automatically one minute before shutter
release.
8