Canon 420 EZ User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Correct exposure display
X-sync shutter speed
Flash-charge
AF in-focus indicator
completion indicator.
5) Exposure will be correct if the X-sync
shutter speed and aperture values re
main continuously lit.
•When both values blink, the subject is
too far away. Remove your finger from
the shutter button and move closer to
the subject until both values remain
continuously lit when pressed again.
•When shooting in daylight (fill-in flash),
the minimum aperture of the lens in use
may blink. The background will be
overexposed but the main subject cor
rect. (see p.15)
•The camera-shake warning does not
sound when the flash is turned ON.
I3