Film rewinding, Removing the film in mid-projection, Film rewinding i – Canon P 400 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Film Rewinding
I
When projection has been completed, stop the film
advance immediately by turning the switch knob to
“OFF”. Then wind up the film remaining in the film guide
cover onto the take-up reel by hand completely.
Pass the end of the film on the film rewinding guide
and insert it into the slot of the supply reel shaft.
Bend the clutch lever of the supply reel in the direc
tion of the arrow shown on the lever.
Rewind the film by setting the switch at
REW.”.
'FWD. &
Removing the Film in Mid-Projection
If it becomes necessary to remove the film before projec
tion is completed, follow the instructions below;
■j Turn the switch knob to “OFF".
10