Proper winding of power cord – Canon P 400 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Remove the film from between the film loading guide
and the rubber roller.
Open the film guide cover by pulling towards you from
the top. Then remove the film from the guide.
A
Gently pull the pressure plate towards the lens to
” release the film and carefully disengage it from the
film driving claws. If the film cannot be released smooth
ly, do not force it, but remove the lamp-house cover and
rotate the shutter blade slowly by hand until the film is
freed from the claws.
Proper Winding of Power Cord
Wind the power cord as illustrated in the picture when
storing the projector equipped with the three-core power
cord
11