Canon CINEZOOM 512 - Manual (Page 34)

jSide cover
holder I ! Isuppiy spool
I Pressure I spindle
plate knob iMercury battery
I chamber
Ipressure plate Ipilm take-up spool
spindle
Open the film e^te
Counter towards S
Remove the empty spool. The white line
illustrates the path of advance of the film.
Pull the pressure plate out in preparation
to insert the film.
• At this time, the film counter will return
to the S start mark.
Have the spool and film ready. Face (1)
surface up.
Pull out the film about 25cm, being careful
that the film does not slacken.
Insert the film spool into the supply spool
spindle and place the film into the film gate.
8
After the film has been sufficiently insert­
ed, return the pressure plate to its original
position to keep the film secure.