Canon CINEZOOM 512 User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Bend the end of the film and insert it into
the slit of the take-up spool.
• If the film is not long enough, press the
shutter
button
and
extract.
Do
not
pull
out the film.
Face the emulsion side of the film on the
inside, and tightly wind it four or five times.
Insert the take-up spool into the take-up
spindle.
• It is best if the inserted film has a little
extra length at the film gate opening.
• After the film has been loaded, there will
be four notches on the supply spool and
three notches on the take-up spool.
• The spool and film must be fully inserted.
4 notches
3 notches
35
Advertising