Flash exposure compensation, Press the <(o)> button, Select i – Canon EOS 1100 D User Manual
Page 13: Set the flash exposure compensation amount
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting Exposure Compensation*
m
Flash Exposure Compensation
Set flash exposure compensation if the flash exposure of the subject
does not come out as desired. You can set the flash exposure
compensation up to ±2 stops in 1 /3-stop increments.
Press the <(o)> button.
(¿10)
The Quick Control screen will appear
(p.40).
Select I®].
Press the < v> key to select
[W*
[Flash exposure comp.] will be
displayed at the bottom.
‘ Set the flash exposure
compensation amount.
To make the flash exposure brighter,
turn the <£S> dial to the right.
(Increased exposure)
To make it darker, turn the <£S> dial
to the left. (Decreased exposure)
When you press the shutter button
halfway, the
<W>
icon will appear in
the viewfinder.
After taking the picture, cancel the
flash exposure compensation by
setting it back to 0.
m
If [Ql‘
Auto Lighting Optimizer]
(p.107) is set to any setting other than
[Disable],
the image may look bright even if a decreased exposure
compensation or decreased flash exposure compensation has been set.
3 You can also set flash exposure compensation with
[Built-in flash func.
setting]
in
[Cl*
Fiash controi]
(p.167).
102