Canon EOS 1100 D - Manual (Page 18)

Correcting the Brightness and Contrast Automatically ^
If the image comes out dark or the contrast is low, the brightness and
contrast can be corrected automatically. This feature is called Auto
Lighting Optimizer. The default setting is [Standard]. With JPEG images,
the correction is done when the image is captured. For RAW images, it can
be corrected with Digital Photo Professional (provided software, p.270).
I Select [Auto Lighting Optimizer],
Under the [Cl'] tab, select [Auto
Lighting Optimizer], then press
< @ > .
Select the setting.
Select the desired setting, then press
<(:
et
)>.
Take the picture.
The image will be recorded with the
brightness and contrast corrected if
necessary.
Without correction With correction
m
a
Under Custom Functions (C.Fn)], if [5: Highlight tone priority] is
set to [1: Enable], the Auto Lighting Optimizer will be set automatically to
[Disable] and you cannot change this setting.
Depending on the shooting conditions, noise might increase.
If a setting other than [Disable] is set and you use exposure
compensation, flash exposure compensation, or manual exposure to
darken the exposure, the image might still come out bright. If you want a
darker exposure, set
[Auto Lighting Optimizer] to [Disable] first.
In Basic Zone modes, [Standard] is set automatically.
107