Test conditions – Canon IXUS 750 User Manual

Page 118

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

*1 This digital camera supports Exit 2.2 (also called “Exit Print”). Exit Print is a

standard for enhancing the communication between digital cameras and
printers. By connecting to an Exit Print-compliant printer, the camera’s image
data at the time of shooting is used and optimized, yielding extremely high
quality prints.

Battery Capacity (Battery Pack NB-3L (Fully charged))

Number of Images Shot

LCD Monitor ON

Playback Time

(Based on the CIPA

LCD Monitor Off

standard)

Approx. 150 images

Approx. 600 images

Approx. 3 hours

•The actual figures will vary according to the shooting conditions

and settings.

•Movie data is excluded.

•At low temperatures, the battery performance may diminish and

the low battery icon may appear very rapidly. In these circum­

stances, the performance can be improved by warming the bat­

tery in a pocket before use.

Test Conditions

Shooting: Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F),

normal relative humidity (50% ± 20%), alternating wide

angle end and telephoto end shots at 30 second intervals

with the flash fired once every two shots and the camera

power turned off after every tenth shot. Power is left off

for a sufficient amount of time*, then the power is turned

back on and the testing procedure is repeated.

•A Canon-brand memory card is used.

*Until the battery returns to normal temperature

Playback: Normal temperature (23 °C ± 2 °C/73 °F ± 3.6 °F),

normal relative humidity (50% ± 20%), continuous

playback at 3 seconds per image.

“A See

Battery Handling Precautions

(p. 105).

116

Advertising