Subject in recorded image is too bright, Image flashes white. image contains noise, White dots appear on the image – Canon IXUS 750 User Manual
Page 99
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Subject in recorded image is too bright.
Subject is too close,
making the flash too
strong.
Subject is bright in
contrast to the
background.
Too much light is shining
directly into the camera,
or is being reflected off
the subject.
Flash is set to on.
>Shoot within correct shooting
distance of the subject when using
the built-in flash (p. 114).
»Set the exposure compensation to a
negative (-) setting (p. 51).
»Use AE lock or use the spot
metering function (p. 48, 50).
»Change the shooting angle.
>Set the flash to
Guide
p. 9).
(flash off)
{Basic
Image flashes white. Image contains noise.
ISO speed is too high.
►Higher ISO speeds Increase image
noise. To take clean images, use as
low an ISO speed as possible (p. 64).
and ^ modes.
'In
¿K
the ISO speed increases and noise
can appear.
White dots appear on the image.
Light from the flash has
1
•This is a phenomenon that occurs
reflected off dust
i with digital cameras and does not
particles or insects in the
1
constitute a malfunction,
air. This is particularly
noticeable when
shooting using the wide
angle.
o
c
2
(D
0)
O
O
i-t-
5'
tn
97