I- 1, Mercury battery loading – Canon Canonet 17 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
r
Mercury Battery Loading
Before using your Canonet G-III,
load it with the mercury battery.
To open cover of the battery com
partment, insert a fingernail in the
open slot, sliding the cover in the
direction of the arrow. By using a
slight pull outward, the cover will
hinge open.
3
I- 1
Insert the battery on the tab in
the compartment.
■
Be sure the mercury battery
is inserted only in the correct
direction.
■
A 1.3V M20 ( # 625) mercury
battery should be used—equivalent
to
the
Mallory
PX-625,
or
Eveready EPX-625.
Press cover to close.
Replacing Battery
When replacing the mercury bat
tery,
open
the
cover
of
the
mercury
battery
compartment
and slowly pull out the tab being
careful not to let the battery
drop out.
■ When the camera will not be
used for a long period, remove the
battery.