Deleting a calibration setting – Canon EOS 5 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
* If an intermittent beep tone is heard and
the calibration number blinks, temporarily
move the command dial to a position other
than gJS , repeat the calibration proce
dure from step 1.
Deleting a Calibration Setting
If calibration is repeated at the same calibra
tion number but with a different eye, or if suc
cessive calibrations are performed by differ
ent people. Eye Controlled Focus operation
may become unstable or misoperation may
occur. If this happens, delete the setting at
the problematic calibration number as de
scribed below and repeat the calibration
procedure.
1) Turn the command dial to the“ Q33 "posi
tion.
2) Turn the main dial to the number of the
calibration setting you want to delete.