Canon EOS 5 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1) Press the function button so that “ <g> ”
appears in the LCD panel.
2) Turn the main dial to select “1 ” or “0” in the
LCD panel.
1: Red-eye reduction on. <s> is displayed
in the LCD panel.
0: Red-eye reduction off. <S> is not dis
played in the LCD panel.
• A lens hood attached to the lens will block
light from the built-in flash. Always remove
the lens hood when using the built-in flash.
• The bullt-ln flash and an external flash
cannot be used together.
• The bullt-ln flash will not operate when an
external flash unit or cover is attached to
the accessory shoe.
• If the built-in flash is held down while the
flash button is pressed, >03 will blink in
the LCD panel and the camera will stop
operating. This is not a malfunction. Press
the shutter button halfway to resume nor
mal operation.
37