Canon T 90 User Manual
Page 114
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
• The exposure value stored into memory in
the multi-spot metering mode is cleared
under the following conditions:
3.
When more than 30 secs have elapsed
without releasing the shutter after the spot
metering button has been pressed last
When the metering mode selector is
pressed.
When the finger is removed from the shut
ter button after exposure.
Multi-spot metering is only possible by pressing the
spot metering button unlike the one-point spot
metering. (—. p.65)
Up to eight points can be metered using the multi
spot metering Subsequent attempts will be disre
garded
Advertising