Canon T 90 - Manual (Page 209)

2 FE lock TTL flash-auto: The camera's
FE lock program automatically sets
the aperture The main flash tube pro­
duces preflash and the reflection from
the subject is measured by TTL spot
metering and is entered into memory,
X-sync speed is also automatically set
between 1/60 — 1/250 sec upon flash
charge-completion. Automatic fill-in
flash is possible
Remote Control:
Possible With three-terminal
contact for remote control. Remote
Switch 60T3 is required
Multiple Exposure:
By pressing both the
shooting mode selector and the metering
mode selector at the same time. Continu­
ous multiple exposure is possible,
Reset/clear during shooting and preset
up to 9 exposures are also possible. Auto­
matically cleared upon completion of
preset exposures.
Eyepiece Shutter:
Provided.
Exposure Preview Button:
Provided
Finder Display Selector:
All LCD/LED dis­
plays can be turned ON or OFF. LCD dis­
play to the right of the viewfinder and the
display panel can be illuminated by the
built-in illumination lamp.
LCD Display Panel:
Displays only the informa­
tion required at the time, e g. shooting
mode, metering mode, film winding mode.
1 2 1