Removing and replacing components (cont.), Care and cleaning – LG LMX21984 User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CARE AND CLEANING
REMOVING AND REPLACING COMPONENTS
(CONT.)
Crisper humidity control
To remove the glass
You can control the amount of humidity in the
moisture-sealed crispers. Store vegetables or
fruits requiring more or less humidity in separate
crispers. Adjust the control to any setting
between HIGH and LOW.
• LOW lets moist air out of the crisper for best
storage of fruits.
• HIGH keeps moist air in the crisper for best
storage of fresh, leafy vegetables.
CAUTION : The glass shelf over the crisper is not
firmly secured. Be careful when iing.
Removing crisper
To remove, pull the drawer out to full extension.
Lift the front of the crisper up. then pull it straight
out.
■ To install, slightly tilt up the front and insert the
drawer into the frame and push it back into
place.
Lift up the glass under the crisper cover.
Pull the glass up and out.
Gllde'N’Serve
The Glide'N’Serve provides storage space with a
variable temperature control that keeps the
compartment colder than refrigerator.
This drawer can be used for large party trays, deli
items, or beverages, (but this drawer cant be
used for vegetable.)
Controls
The control regulates the air temperature in the
drawer. Set control level to COLD (print on
surface) to provide normal refrigerator
temperature. Use the COLDER (print on surface)
setting for meats or other deli items.
NOTE: Cold air directed to the Gide'N’Serve can
decrease refrigerator temperature. Refrigerator
control may need to be adjusted.
33 @