LG WM3070HWA - Manual (Page 28)

USING YOUR WASHING MACHINE 27
O NOTE---------------------------------
• The steam option cannot be used with all cycles.
• Steam may not be clearly visible during the steam
cycles. This is normal. Too much steam could damage
clothing.
• Do not use steam with delicate fabrics such as wool,
silk, or easily discolored fabrics.
Saving energy, COLD WASH™
Adding the COLD WASH™ option reduces energy usage and
provides the same washing performance as a warm water
wash.
By using 6 different washing motion (Tumbling, Rolling,
Stepping, Scrubbing, Swing, Filtration), fabrics get the
cleaning benefits, without the energy usage.
1 Press and turn to the desired cycle.
2 Press [°coiDWASH^. The washer will automatically adjust the
cycle settings.
3 Set any other desired options.
4 Press (^.
O NOTE-----------------------------------
• When you select the COLD WASH™ option, wash time
will be increased up to 10 minutes.
• For high wash efficiency, it is recommended to use
less than 8 pounds.
Saving time.TURBOWASH"^
Adding the TurboWash™ option reduces cycle time and
provides good performance in normal cycle.
By using the TurboWash''''^, We can save the time without
sacrificing performance.
1 Press and turn tO) fo fhe desired cycle.
2 Press [jTWBowMsj. The washer will automatically adjust the
cycle settings.
3 Set any other desired options.
4 Press (^.
Setting options during cycle
You can add the desired options during the wash cycle.
Button lock feature, CHILD LOCK
You can lock the washing machine to prevent children or
others from changing the cycle settings by pressing the
buttons during the cycle.
To enable child lock
Press and hold for 3 seconds during the wash cycle.
- When the CHILD LOCK is enabled, a [!_ message and the
remaining wash time are displayed, in turn, on the display
panel of the washing machine.
To disable child lock
(When the CHILD LOCK is activated.)
Press and hold r
PRE WASH
for 3 seconds during the wash cycle.
•CHUOtOClt
•
Q NOTE-----------------------------------
• CHILD LOCK lasts after the end of cycle. If you want to
deactivate this function. Press and hold the PREWASH
button for 3 seconds.
Saving customized wash cycle, PGM SAVE
You can save a cycle with all the settings and options you
use most frequently.
To save cycle
1 Press and turn to the desired cycle.
2 Press the desired option to use the other options.
3 Press and hold pcusTO^7| for 3 seconds during the wash
cycle.
- The cycle with your preferred settings and options is
saved.