Operation, Antenna connector, External speaker – Cobra Electronics 18 WXST II User Manual
Page 13: Power
Advertising
13
Rear Panel
Antenna Connector. This female connector per-
mits connection of the transmission line cable
male connector to the transceiver.
External Speaker. The External Speaker Jack is
used for an external speaker. The external speak-
er should have 8-ohm impedance and be rated
to handle at least 4.0 watts. When the external
speaker is plugged in, the internal speaker is
automatically disconnected.
Power: This cable is permanently attached to the
radio. If you wish to remove the radio after instal-
lation, disconnect at fuse holder and ground
connector.
Antenna
Connector
Operation
External
Speaker
EXT. SPKR.
POWER
13.8V DC
ANTENNA
Power
Note
Cobra external speakers are
rated 15 watts
Advertising