Astak G660 DashPro2Channel - User Manual - Manual (Page 11)

Connect the Main Unit and the Mount
Place the groove at the top side of the main
unit against the groove area on the mount and
push until a “click” sound is heard.
Insert the Memory Card
When inserting memory cards, check to
see that the correct side of the card is
facing up before inserting into the slot.
Remove Double-sided Tape
Remove the double-sided tape attached to
the mount.
Connect the Main Unit and the
Mount
Attach the device at an appropriate
position, turn the handles to adjust the
footage angle of the product so that the
camera is facing the front and the vehicle
interior. Here, heed caution so that there
are no obstructions in front of the lens.
Connect Cigarette Jack (Main Unit)
Connect the cigarette jack cable with the
main unit.
Organize Power Cable, Connect
Power
Use the cable clip to organize the power
line and connect the power with the
cigarette jack socket.
Vehicle Installation Complete
After turning on the ignition, check to see
whether the device LED turns on.
Recording will start once the LED turns on
and "Starting Infinite power recording.”
voice guidance is provided.
01 B
efo
re
Us
e
09
Connecting the camera to the vehicle
• Attaching the device in a position that interferes with driver’s field of
vision or with vehicle operations could result in accidents.
• Firmly attach the device so that it does not move or fall off while
driving.
Chapter 01┃ Before Use
Installing in the Vehicle