Astak G660 DashPro2Channel - User Manual - Manual (Page 14)

• Problems may occur within SD cards that have been used for prolonged periods of time.
• Regularly format the SD card for use.
• When formatting SD cards, set the format type as FAT32.
• For stable recording functionality, the entire capacity of the SD card is not used.
Download the firmware from the following website.
Remove the Micro SD card from the device and use a card reader to
connect with the PC.
Back up data currently in the memory card separately and format the
memory card.
Copy the downloaded firmware into the SD card.
Insert the SD card with the firmware copied and turn the power on.
At such time, the red LED will remain on.
Once the firmware upgrade is complete, the LED will change to green.
Once upgrade ends, the downloaded firmware is automatically deleted.
COPY
Firmware Update
Firmware Update
12
1
2
3
4
5
6
7
Once upgrade is complete, the device will automatically reboot and
recording can begin.
8
Cautions upon using
Memory Cards
Chapter 02┃ Basic Product Functions
02
Ba
sic
Pr
od
uc
t Fu
nc
tio
ns