Astak R4020A - User Manual - Manual (Page 40)

39
Site Survey
The Site Survey function is used to scan the available wireless networks for the router
to connect.
Note: This function is not supported and hidden in Router Mode.
The Web interfaces will display differently in each working mode.
 AP Mode
In AP mode, this function is only used to see the wireless networks within the range.
 AP Client Mode
If you are setting the router as an AP client, confirm Network Type has changed to
“Client” in Wireless > Basic Settings.
If you are setting the router as a Repeater, confirm Enable Universal Repeater Mode
(Acting as AP and client simultaneously) is checked, and SSID of Extended Interface
is set in Wireless > Basic Settings.
Follow the steps to connect to the AP.
Step 1:
Click the
button, you will see the wireless networks within the range,
select the one you want to connect and click the button.