Astak R4020A - User Manual - Manual (Page 66)

65
Item Description
Enable QoS Check the box to enable QoS function.
Automatic Uplink
Speed
Check the box to set an automatic uplink speed.
Manual Uplink Speed
(Kbps)
Uncheck the “Automatic Uplink Speed” box, and then you can
manually set the uplink speed.
Automatic Downlink
Speed
Check the box to set an automatic downlink speed.
Manual Downlink
Speed (Kbps)
Uncheck the “Automatic Downlink Speed” box, and then you
can manually set the downlink speed.
Address Type
There are two types of address provided can be used in a QoS
rule: IP and MAC. Please select one type.
Local IP Address
When you select IP address type, you can input the IP range you
will make a rule for.
MAC Address
When you select MAC address type, you can input the MAC
address you will make a rule for.
Mode
There are 2 mode provided to limit the speed: Guaranteed
minimum bandwidth and Restricted maximum bandwidth.
Select one type according to your need.
Uplink Bandwidth
(Kbps)
Input an appropriate uplink bandwidth.
Downlink Bandwidth
(Kbps)
Input an appropriate downlink bandwidth.
Comment You can add some description as comment for the rule.
Current QoS Rules
Table
The list displays the QoS rules you have set.
If you want to remove one or more settings, check the “Select”
boxes of the records and click the
button.
If you want to remove all the settings, click the
button.
Click the
button to uncheck all the boxes.
After setting the parameters, please click the button to save the
configurations, or click the button to reset the configurations before you
changed them.