CREATIVE Modem Blaster V.92 PCI DI5732 - Manual (Page 23)

Installing and Testing the Modem Drivers 3-4
In Windows 2000 1. Click Start -> Settings -> Control Panel.
2. Double-click the Phone and Modems icon. The Phone and
Modems Options dialog box appears.
3. Click the Modems tab.
4. Click your Creative Modem Blaster V.92 DI5732, and then
click the Properties button. The Creative Modem Blaster
V.92 DI5732 Properties dialog box similar to Figure 3-2
appears.
5. Click the Diagnostics tab.
6. Click the Query Modem button to display the response
status of your modem.
If your modem is not responding, it may be due to a conflict
between the modem and another peripheral device. To
resolve the conflict, you must change the settings on your
modem (see “Resolving Conflicts in Windows 2000/XP” on
page B-4).
In Windows Me 1. Click Start -> Settings -> Control Panel.
2. Double-click the Modems icon. The Modems Properties
dialog box similar to Figure 3-3 appears.
3. Click the Diagnostics tab.
4. Click the COM port that has been assigned to your modem.
5. Click the More Info button to display the response status of
your modem.
6. If your modem is not responding, it may be due to a conflict
between the modem and another peripheral device. To
resolve the conflict, you must change the settings on your
modem (see “Resolving Conflicts in Windows 98SE/Me” on
page B-3).
Figure 3-2
Figure 3-3