CREATIVE Modem Blaster V.92 PCI DI5732 - Manual (Page 32)

Modem Features 5-4
Using Modem-
on-Hold 1. If a call comes in while you are on the Internet, the
FaxTalk NetOnHold dialog box similar to Figure 5-1
appears, click the Accept Call button. You have two
minutes to complete your call. The call is
automatically cut off after two minutes.
2. After completing you call, click the Disconnect Call
button.
3. A dialog box similar to Figure 5-3 appears. The
modem will reconnect to the Internet.
• During the software
installation, when selecting
the drivers and applications
to install, be sure that the
FaxTalk NetOnHold
check box is selected.
• Be sure to enable FaxTalk
NetOnHold whenever you
restart your computer. By
default FaxTalk
NetOnHold is disabled.
• Your phone line needs to be
Call waiting enabled to
support Modem-on-Hold.
Figure 5-1
Figure 5-2
Figure 5-3