AVer SPB370 user manual - Manual (Page 8)

E-4
Right Panel
(1) (2) (3)(4) (5)
ETHERNE T RS-232 RGB IN 1 RGB IN 2 AUDIO OU T
IOIOI
Name Function
(1) Audio Out Output the microphone audio signal to an amplifier, on TV, or
AV equipment audio input port. Or, Use an RCA Jack to 3.5mm
Mono Plug Adapter to connect to computer line-in port.
(2) RGB IN 1 &
RGB IN 2
Takes as input the signal from a computer or other sources and
pass it through to the RGB Output and DVI-I port only.
Connect this port to the VGA output port of the computer.
(3) RS-232 Receive command from the computer to operate SPB370.
Connect this port to the RS-232 port of the computer.
(4) Ethernet Use an RJ-45 Ethernet cable and connect it to RJ-45 Ethernet
port. This connection allows using any Web browser to access
the embedded web server and remotely control SPB370. Make
sure SPB370 is connected to IP-based network. Also see “Using
Web Browser to Control SPB370”.
(5) Antitheft slot Attach a Kensington compatible security lock or antitheft device.
Connecting a VGA, Mac Monitor or LCD/DLP Projector
Locate the RGB (VGA) input port of the display device and connect it to RGB OUTPUT port
of SPB370.
Make sure the Video Output switch is set to RGB.
RGB OUTPUT DC 12V VIDEO OUTPUT S-VIDEO
OUTPUT DVI-I OUTPUT USB SD CARD
RGB cable
MAC
LCD/DLP projector
LCD monitor
MAC monitor
Monitor Adapter
(not supplied)
CRT monitor