AVer IWH5000 series - Manual (Page 74)

66
6. Repeat step 4 & 5, if you want to save another PTZ camera position.
7. Restore AutoPan Time: set a time period for restoring auto path function after the PTZ
camera has been moved. Mark the check box and set the time period in second.
8. Using Joystick: Mark to enable for joystick device.
9. Show moving direction indicator line: enable/disable to show the direction line when uses
mouse drag on screen in PTZ mode.
10. Iris: To adjust the iris of PTZ camera. It may not support that depends on brand of the PTZ
camera.
11. OSD: To allow call out PTZ camera factory’s OSD setup menu. The OSD setup menu may
vary that depends on the brand of PTZ camera.
12. When is done, click OK to save the setting or Click Cancel, to leave without saving the new
setting.
13. When PTZ camera is enabling, user can control PTZ camera by using the PTZ control panel
and on screen PTZ control bar.
14. Select the PTZ camera channel and click PTZ button on preview UI to call out PTZ control
panel. PTZ control panel function refers to Chapter 4.4 .
i
- User can move the on screen PTZ controller to any position of screen
- The on screen PTZ controller only display on a channel screen at a time.