AVer NXU8000 - Manual (Page 94)

82
Chapter 5 Customizing the DVR System
In the Preview/Advanced screen mode, click button to customize your DVR. When the DVR
configuration setup selection appears, select and click the buttons you want to change the setting.
5.1 System Setting
In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default to revert back to original factory setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to record one hour
data, the system automatically replaces the oldest data. In case you have more than one storage path,
the system automatically saves the data to the next storage path. You may also add additional
network-attached storage (NAS) for extremely high storage capacity (see also Map Network Drive in
(14)System Configuration ). By default the data is stored in C:\Data, to insert another storage path,
click Add. To remove the selected path, click Delete. If you want the system to automatically erase the
data after a certain days, enable the Delete recorded data after check box and enter the numbers of
days in Days text box. If you want the system to automatically erase the event and alarm log after a