AVer NXU8000 - Manual (Page 96)

84
(6) TV Out
Select the camera you want to appear on TV and set the time gap from 3 to 10 sec. before it switches
to the next camera.
i TV Out function doesn’t support on NVR server.
The DVR system supports both analog and IP camera channel on TV output.
- Advance button (The Advance functions only for NV6240T/6480T.)
Select the video card channel and camera that user wants to display on TV.
In Advance mode, user has two types of display selection
– Autoscan and Fixed layout.
 Autoscan
i
The Advance tab will be available when the Display 21 card is installed.
(1) Select the video source from drop down list. If user only installs one NV card on the
computer, then there is only one video card channel for selection.
(2) Select the display mode as Autoscan.
(3) Preview screen: Live camera video would be displayed here.
(4) View Mode: Select the video mode user wants to display on screen. The system will auto
cycle switch to display the next channels.
(5) Cameras: User can select the cameras that user wants to display on the screen. Only
those selected cameras would be displayed on the screen. Also, the camera will be displayed
by the selecting order.