AVer MXR6008 - Manual (Page 58)

52
4. Click on the blocks to set the schedule or click All to select all. To un-select the specific
schedule blocks, click the Remove and click blocks to un-select. To store the setting, click
Save. To remove the settings, click Clear.
5. To end Schedule Setting, click OK to exit and accept the setting and Cancel to exit without
saving the setting.
3.8 Backup Setup
The backup is purely for backing up the *.dvr file from the DVR sever. You can select to back in
Auto Backup or Manual Backup mode. Auto Backup continuously archives one hour of the
recorded data at a time, starting from the specified date. As for Manual Backup, it only archives
the recorded data of selected date.
i
To back up the data, you must have at least 2G hard disk space.
1. Click Modify to set the backup schedule.
2. Select the Backup mode:
 Auto Backup mode: the backup will automatically execute when the setup is completed
- In Begin Date drop down calendar, select the date from where to start
- Click Add to set the storage path.
- Click Delete to remove the selected storage path.
- Click Schedule to select/unselect the time you want to backup. The red block turns