AVer MXR6008 - Manual (Page 98)

92
2. In No./Name/Description enter alarm name and description. Alarm No. will be created by
DVR system.
3. In Enable Time, the number from 00 to 23 represent the time in 24-hour clock. Select the
time and click the block you want to activate or deactivate the alarm function. When it is
deactivated the color of the block turns white.
4. In Conditions , you can set “Trigger if any” to activate if it falls to one of the conditions or
“Trigger if all” to activate if it falls to all conditions.
5. In Camera section, select and click on the camera number in Video Loss to set the condition
for the system to alarm.
6. In Sensor, select and click on the sensor number to set the condition for the system to alarm.
If the sensor normal status is high, set the sensor condition to low. Click IP Camera Sensor
to configure sensor status of IP camera. Click High/Low to set sensor status to high or low.
- Continue trigger duration: Set a time period that when sensor has been trigger and stay
in the same status for that period, then the alarm will be sent out.
- Abnormal Event: Enable/disable the condition of the event for system to alarm.