AVer FX3000R User Manual
Page 20
16
System > Network > Others
In Others page, you can enable/disable the UPnP setting. If your router does not support UPnP function,
you can enable the UPnP forwarding and set the port mapping.
UPnP Support: The IP camera supports UPnP, if this service is enabled on your computer.
[Note] UPnP must be enabled on your PC.
UPnP Port Forwarding: If the IP camera is installed behind the firewall, please select ON to
enable it.
HTTP Port: Setup web page connecting port and video transmitting port (Default is 80).
HTTPS Port: AVer IP Camera
supports encrypted browsing using HTTPS.
RTSP Port: Setup port for RTSP transmitting (Default is 554).
SNMP (Simple Network Management Protocol) provides a simple framework for
administering networked hardware. SNMPv1, SNMPv2c, and SNMPv3 can be enabled
simultaneously.
SNMPv1 and SNMPv2: The term "Community name" in SNMPv1 and SNMPv2 can be roughly
regarded as key. The person who has the community name has the authority to read or edit the
information of IP camera via SNMP. Check the box to enable SNMPv1 and SNMPv2 protocol,
and specify the community name for Read/Write and Read only community. The user who
uses read community name to access the IP camera cannot modify any data of this camera