AVer FX3000R User Manual
Page 38
34
Application > Motion Detection
Both admin and operator levels can specify up to 3 areas on the screen to monitor the motion. In the
motion detection page, the frame will blink when the motion detected has reached the percentage
threshold setting. This feature can be utilized to trigger a response in Event setting.
To Set the Motion Detection
1.
Click Application > Motion Detection.
2.
Enable the region check box (Region 1, Region 2, Region 3) to create a motion detection frame.
3.
Move and adjust the frame to the area you want to detect the motion.
4.
Adjust the sensitivity and percentage. Sensitivity detects the motion on the screen and assesses
the changes in pixel thru percentage. The motion detection will activate when the Monitor level
reaches the defined percentage.
5.
Click Save to apply the new setting and Cancel to keep the old setting.