CREATIVE 1212M - Manual (Page 15)

2 - Installation
Software Installation
E-MU Digital Audio System 15
Software Installation
Installing the E-MU 1010 Drivers
The first time you restart your PC after installing the E-MU 1010 PCI card, you will need
to install the PatchMix DSP software and E-MU 1010 PCI card drivers.
Windows 2000 or Windows XP
The software is not compatible with other versions of Windows.
E Serial Number -
During the registration
process, you will be asked
to enter your 18-digit
serial number. The serial
number is located on the
back of the box and on
the 1010 PCI Card.
1. After you have installed your Digital Audio System, turn on your computer.
Windows automatically detects the Digital Audio System and searches for device
drivers.
2. When prompted for the audio drivers, click the Cancel button.
3. Insert the E-MU software Installation CD into your CD-ROM drive. If Windows
AutoPlay mode is enabled for your CD-ROM drive, the CD starts running automati-
cally. If not, from your Windows desktop, click
Start -> Run and type d:\setup.exe
(replace d:\ with the drive letter of your CD-ROM drive). You can also open the CD
and double-click Setup.exe .
4. The installation splash screen appears. Follow the instructions on the screen to
complete the installation.
5. Choose “Continue Anyway” when you encounter the “Windows Logo Testing”
warning screen. See the note below for more information.
6. When prompted, restart your computer.
Uninstalling all Audio Drivers and Applications
At times you may need to uninstall or reinstall some or all of the audio card's applica-
tions and device drivers to correct problems, change configurations, or upgrade
outdated drivers or applications. Before you begin, close all audio card applications.
Applications still running during the uninstallation will not be removed.
1. Click Start -> Settings -> Control Panel .
2. Double-click the Add/Remove Programs icon.
3. Click the Install/Uninstall tab (or Change or Remove Programs button).
4. Select the E-MU driver/application entries and then click the Add/Remove (or
Change/Remove) button.
5. In the InstallShield Wizard dialog box, select the Remove option.
6. Click the Yes button. Restart your computer when prompted.
7. You may now re-install existing or updated E-MU 1010 PCI card device drivers or
applications.
Note About Windows Logo Testing
When you install the Digital Audio System drivers, you will see a dialog box that
informs you that the driver has not passed Windows Logo testing.
The Digital Audio System drivers are not signed because the driver does not support
some of the consumer audio features that the Microsoft driver signing program requires,
most notably Digital Rights Management.
However, the Digital Audio System drivers have been rigorously tested using the same
test procedures that a signed driver requires, and it passes in all important categories,
including those that measure the relative stability of the driver. So, it is perfectly safe to
install these drivers on your computer.