CREATIVE 1212M User Manual
Page 89
6 - Using High Sample Rates
Overview
E-MU Digital Audio System
89
E-MU 1820 System at 176.4kHz or 192kHz
(1010 PCI Card & AudioDock)
At the highest sample rate you have 4 inputs and 10 output channels.
There are four possible input configurations when using the E-MU 1820 system at
176.4kHz or 192kHz. Each of the three options provides four input channels.
S/PDIF is not specified to operate at 176.4kHz/192kHz and so all S/PDIF inputs and
outputs are disabled. The headphone output parallels the Monitor output and is no
longer independently assignable, just like at 96kHz.
E-MU 1212 System at 176.4k/192k
(1010 PCI Card & I/O Card)
At 176.4kHz or 192kHz, you have two 24-bit inputs and outputs. S/PDIF is not
specified to operate at these rates and so all S/PDIF inputs and outputs are disabled. The
ADAT input/output channels are reduced to two channels (S/MUX standard).
• Microphone Input and Line 2 Input enabled
• Microphone Input and ADAT Input enabled
(2-chan ADAT)
• Line 1 Input and ADAT Input enabled
(2-chan ADAT)
• Line Inputs 1 & 3 enabled (allows use of turntable inputs at 192kHz)
E-MU 1820 Inputs/Outputs at 176.4kHz or 192kHz
Source
Inputs
Mic &
Line 3
Inputs
Mic
& ADAT
Inputs
Line 1
& ADAT
Inputs
Line 1 & 3
Total
Outputs
ADAT
0
2
2
0
2
Microphone
2
2
0
0
-
Line 1
0
0
2
2
2
Line 2
0
0
0
0
2
Line 3
2
0
0
2
0
Line 4 out (monitor)
-
-
-
-
2
S/PDIF 1
0
0
0
0
0
S/PDIF 2
0
0
0
0
0
Headphone out
-
-
-
-
2 (monitor)
Total
4
4
4
4
10
E-MU 1212M Inputs/Outputs at 176.4kHz/192kHz
Source
Inputs
Outputs
ADAT
2
2
S/PDIF 1
0
0
Line
2
2
Total
4
4