Carrier Access 770-0015 AM - Manual (Page 42)

3-12 IP Router - Release 1.8
Profile Directory: Router Card Profile
SNMP
Name
Enter the community name(s) of the device to access the Local (LAN) Unit through SNMP.
Community names entered into the SNMP program MUST match the values entered here or access
for remote management will not be allowed. The default community name is public, new community
names can have a maximum of 10 characters.
Address
Enter the corresponding IP Address of the device(s) that were entered in the Name field.
Access
<Read> device is allowed to view the settings, but cannot make any changes
<Write> device is allowed to make changes but not view settings
<Both> device is allowed to both read and write privileges
SNMP Trap Destinations
1. Select SNMP Trap Destination - > and select [E NTER ].
SNMP
Setup
Window