Carrier Access 770-0015 AM - Manual (Page 49)

IP Router - Release 1.8 3-19
Profile Directory: Router Card Profile
Network Time Protocol
3. Enter the appropriate data in the following fields.
Network Time Protocol
<Disabled> to disable Network Processing.
<Enabled> to enable Network Processing. The following items appear once enabled.
NTP Server Address
The NTP Server Address specifies the IP address of the NTP server. Setting the NTP server value to
0.0.0.0 will cause the router to listen to and process NTP broadcasts.
Poll Interval
The Poll Interval specifies the polling of the NTP server to a defined number of seconds. The range
(in seconds) is from 16 to1024 seconds, with a default of 16.
Time Zone Offset HOURS
The hours Time Zone Offset is used to calculate gateway time from GMT (Greenwich Mean Time).
Range is -12 to 12.
Time Zone Offset MINUTES
The minutes Time Zone Offset is used to calculate gateway time from GMT (Greenwich Mean Time).
Range is 0 to 60.