B&M 45070 PRO RIPPER SHIFTER - MUST W/T5 & T45 User Manual
Pro ripper shifter, Nstallation instructions
9500749-02
Printed in the U.S.A.
I
nstallation Instructions
Pro Ripper Shifter
1983-2003 Ford Mustang
with T-5, T-5 w/OD & T-45 Transmission
Part Number 45070
©2005, 2003, 2001 by B&M Racing and Performance Products
This B&M Pro Ripper Shifter has been designed to work on all 1983-2003 Ford Mustang models equipped with T-5, T-
5 w/OD and T-45 transmissions. It has been engineered to greatly reduce shift throw and improve shifter feel. Check the
parts and tools lists at the beginning of these instructions for the supplied parts and the tools required to install your B&M
Pro Ripper Shifter. Installation of the B&M Pro Ripper Shifter can be accomplished by anyone with minimal mechanical
experience.
INTRODUCTION
This B&M Pro Ripper Shifter can be installed in less than an hour by carefully following the instructions. Read all
instructions first to familiarize yourself with the parts, tools, and procedures. This kit contains all the parts necessary to
install the shifter.
PARTS
Threaded Adapter
Upper Stick
B&M Pro Ripper
Heavy Spring (2)
Shift Stop (2)
Shift Stop Jam Nut
(2)
Washer (4)
Mounting Nut (4)
Mounting Stud (4)