B&M 45070 PRO RIPPER SHIFTER - MUST W/T5 & T45 - Manual (Page 6)

STEP 18. Install four (4) washers and four (4) mounting nuts.
Tools: Drive, extension, and 13mm socket
Parts: Washers, Mounting nuts
Note: If the transmission fluid level is low, add
more thru the fluid fill hole on the base
of the shifter.
STEP 17. Install B&M Pro Ripper Shifter.
Part: B&M Pro Ripper Shifter
STEP 16. Apply bead of RTV silicone around perimeter of B&M
Pro Ripper base.
Parts: B&M Pro Ripper Shifter
Tools: RTV silicone
STEP 15. Install four (4) mounting studs.
Tools: 4mm Allen wrench
Parts: Mounting studs