B&M 64511 TV CABLE ADAPTER - Manual

9500761-00 Printed in the U.S.A.
I
nstallation Instructions
Throttle Valve Cable Adapter
Edelbrock (GM with TV Cable)
Part Number 64511
©2001 by B&M Racing and Performance Products
STEP 1. Carefully disconnect any throttle cables attached to the carburetor's "linkage plate".
STEP 2. Align the top hole of the "TV corrector plate" with the "throttle cable stud hole" on the carburetor's "linkage
plate". Ensure that the indicated "TV stud" on the "TV corrector lever" faces away from the carburetor.
STEP 3. Place the "shim" included in the kit, between the carburetor's "linkage" plate and the "TVcorrector lever".
This will create the proper spacing for the new "throttle cable stud".
STEP 4. Install the "throttle cable stud" included in the kit but do not fully tighten the "nut".
Shim
Lock Washer
Nut
Throttle cable stud hole
Throttle Cable Stud
Edelbrock Carburetor
Linkage plate
Bolt hole
Lock Nut
TV stud
TV Corrector Lever
Washer
Bolt