B&M 81011 MANUAL STREET ROD SHIFTER, 15 TALL STICK - Manual (Page 3)

STEP 4. Optional: The pitch of the Mounting Bracket can be
changed by loosening the previously installed mounting
hardware and affixing different set screw lengths (one
5/16-24x5/8" set screw is provided) into either or both of
the indicated tension holes.
STEP 3. Attach the Mounting Bracket using the supplied 5/16-18
x1" screw, flat washer, lock nut, and 3/8-16 x 1-1/4"
screws (2).
Note: the original tail housing bolts may be used in place
of the two 3/8-16 x 1-1/4" screws if so desired.
STEP 2. Carefully remove the top two tail housing bolts.
STEP 1. Thoroughly clean the manufacture's fixture hole on top
of the transmssion.
ASSEMBLY
tension holes