Salter Brecknell 7010SB - Manual (Page 4)

FUNCTION KEYS
The Model 7010SB has three function keys to operate the scale. The
ON(TARE), OFF, and lb-oz/ grams keys.
ON (TARE) KEY:
The ON key performs two functions. First it applies power to the scale; second it
tares the weight on the scale to zero. To use the “tare” feature:
1. Place an empty container on the weighing platform.
2. Press the ON key. Even though the container weight is on the weighing
platform, the scale will display zero weight.
3. When an item is placed on the container, the scale only displays the weight
of the item, not the weight of the container.
4. To reset the scale for no tare, remove the container and its contents from
the weighing platform. Press the OFF key, then the ON key to reset the
scale to zero weight.
(The tare function will work over the full weighing range of the scale but will not
extend the overall capacity of the scale.)
Important Note: It is recommended to press the “OFF key” then the “ON
key” before placing an item on the scale. This will help ensure accurate
weight readings.
OFF KEY:
This key turns off the power to the scale.
LB-OZ/ GRAMS:
The lb-oz grams key is to switch between weighing lb-oz and grams, it is also
used for entering into the calibration mode.
ZERO THE SCALE:
The proper method of zeroing the scale is to press the “OFF” key, then turn the
scale back on by pressing the “ON” key.
SLEEP MODE:
The default setting for sleep mode is Off ( SLP0). If there is no activity, the scale
will turn itself off after 30 seconds The sleep mode can be configured to On
(SLP1) via software.
PN# 7010SB-01 REV. A Page 4 of 7