Brondell H2O+ Pearl H620 Water Filtration System - Manual (Page 13)

11
TROUBLESHOOTING
Symptom Check Measures to take
Unusual taste of
water .
• Is the temperature of the supply water
too high?
Use cold water only and flush system
for 2 minutes .
• Is it time to replace the filter? Replace the filter .
The amount of
filtered water has
suddenly increased
or decreased .
• Is the supply water valve closed? Check the supply water valve .
• The temperature of the supply water
dropped dramatically .
If the water temperature lowers dramatically,
the amount of filtered water will reduce
• Is the filter blocked or damaged? Replace the filter .
No water comes
out .
• Check if water supply valve under sink or
the faucet diverter is closed .
Open supply valve and/or the diverter .
• Have you missed your scheduled filter
replacement?
Replace the filter .
In most cases, problems with your Brondell H2O+ water filtration system can be resolved with a
little troubleshooting by checking each of the items below . If you cannot resolve the problem
you are having after troubleshooting, please call Brondell customer service toll free: 888-542-
3355 or email us at support@brondell .com .