2 delivery scope and transport inspection, 3 unpacking, 4 disposal of the packaging – CASO Germany IMCG25 User Manual

Page 49: 5 setup, 1 setup location requirements

Advertising
background image

caso IMCG25

49

10.2 Delivery scope and transport inspection

As a rule, the Microwave and grill IMCG25 is delivered with the following components:

• Microwave and grill IMCG25

• Metal rack

• Baking sheet

• Operating Manual

Please note

► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete

shipment or damages as a result of inadequate packaging or due to transportation.

10.3 Unpacking

To unpack the device, proceed as follows:

• Remove the device out of the carton and remove the packaging material.
• Remove the accessories located in the cooking chamber and remove the packaging

material.

Please note

► Please don’t remove the protective film from the inside of the door (if equipped), since

this makes the cleaning of the device easier.

10.4 Disposal of the packaging

The packaging protects the device against damages during transit. The packaging materials
are selected in accordance with environmentally compatible and recycling-related points of
view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and
reduces the quantities of accumulated waste. Take any packaging materials that
are no longer required to “Green Dot” recycling collection points for disposal.

Please note

► If possible, keep the original packaging for the device for the duration of the guarantee

period of the device, in order that the device can be re-packaged properly in the event of
a guarantee claim.

10.5 Setup

10.5.1

Setup location requirements:

In order to ensure the safe and trouble-free operation of the device, the setup location must
fulfil the following prerequisites:

• The device must be set up on a firm, flat, horizontal and heat-resistant surface with

sufficient load-bearing capacity for the oven and the maximum weight of the expected
food that is to be prepared in the oven.

• Choose the setup location in such a way that children cannot reach any hot surfaces on

the device.

Advertising