CASO Germany IMCG25 - Manual (Page 54)

caso IMCG25 54
11.3 Sensor touch fields:
+30 sec
If the programming has already been performed you can extend this
in 30 second intervals using this function.
Pause/Cancel
To pause and reset the settings.
Start/Quick Start
Press to set time and start the unit at full power.
Press to start a cooking program.
11.4 Signal tones
The device transmits the following signal sounds as an acoustic feedback signal:
• A quiet beep: The device has accepted the entry.
• Ring tone: The cooking time has ended.
11.5 Safety equipment
11.5.1 Warning notices on device
ATTENTION
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the back upper
side of the housing. The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
11.5.2 Door latch
A safety switch is installed in the door latch of the device, which prevents the device from
being operated when the door is open.
ATTENTION
Danger due to microwaves!
If this safety device is defective or if this safety device is bypassed, you can directly expose
yourself and others to microwave radiation.
► Do not operate the device if the safety switch is defective.
► Do not disable this safety device.